UNIVERSAL WATER BATH (Dual Purpose) 6738
Useful for dual purpose. It is a combination of serological and routine rectangular water bath with holes and co-centric rings. Standard double wall construction. Inner chamber made out highly polished stainless steel sheet and exterior made out of thick mild steel duly finished in stoving enamel paint, The gap between the two walls is filled with special glass wool for temperature insulation. Immersion heaters are provided for heating to attain temperature range from 5ºC above ambient to 90ºC ±1ºC ans is controlled by capillary type thermostat, controlled by thermostat knob on the panel. Supplied complete with plug & cord. The equipment works on 220Volts 50Hz single phase AC. Equipments has been provided with two covers, one of a pyramidal shape and the other with 75mm diameter holes with co-centric rings. The chamber is provided with drain cock to easily drain out the water whenever required. Chamber sizes in mm
a) 300 x 225 x 175
b) 450 x 300 x 175
OPTIONALS : (Extra Cost)
i) Stirring arrangement SS rod & blades.
ii) Digital temperature Indicator.
iii) Digital temperature Indicator-cum-controller.

CONSTANT TEMPERATURE REFRIGERATION LIQUID BATH 6740
a) Standard double walled construction. Inner chamber made out of thick highly polished stainless steel sheet. Temperature range 5ºC to 90ºC and controlled by sensitive Mercury contact thermometer with an accuracy of ±0.2ºC. Fitted a stirrer and speed regulator. Chamber size : 500 x 250 x 250mm.
b) As above but refrigerated bath fitted with a FHP pump for circulating the cord liquid to the external equipment.
OPTIONAL: (Extra Cost)
i) Digital temperature controller-cum-indicator instead of contact thermometer.

REFRIGERATED LIQUID BATH 6741
Standard construction, inner chamber made out of stainless steel sheet with digital temperature controller-cum-indicator. Temperature control range from -20ºC to 20ºC. Chamber Sizes : 450 x 300 x 300 mm.

WATER BATH INCUBATOR SHAKER 6743
(Metabolic Shaking Incubator)
Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions. Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steel duty finished in stoving enamel paint. The lid made of stainless steel. The gap between the two chambers filled with glass wool to pre vent loss of heat. The temperature is achieved by superior immersion heater and is controlled by capillary type thermostat from ambient to 90ºC ±0.5ºC. The shaking mechanism is fitted with variable speed motor coupled to shaking tray work in on rollers. Shaking speed is controlled from 40 to 140 cycles per minute. Shaking tray can hold either test-tubes or flasks of 25ml. or 50ml. or 100ml. capacity. Front panel includes on-off switch, shaking mechanism indicator, speed control, thermostat control etc. L-Shaped thermometer is provided to indicate inside temperature. Equipment to work on 220Volts, 50Hz single phase AC. Inner chamber sizes in mm: a) 275 x 275 x75, b) 275x275x150, c) 400x300x75
OPTIONALS : (Extra Cost) Shaking Tray for 25ml, 50ml and 100ml

WATER STILL (Manesty Type) 6750
Aluminium Wall hanging casted aluminium vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space saving arrangement is provided. The condenser is seamless. Fitted with automatic ejection device which operates automatically when water vessel gets dried. The baffle cup and condenser are made out of thick stainless steel sheet. Output Capacity Per Hour approx. a) 2-3 litre, b) 4-5 litre

WATER STILL (Manesty Type) 6753
Stainless Steel Wall hanging. Specification as above but made of stainless steel sheet.
Output Capacity per hour approx.
a) 2-3 litre, b) 3-4 litre, c) 4-5 litre

WATER STILL (BARNSTEAD TYPE) Table model 6755
Double wall construction having both made out of highly polished stainless steel sheet. The gap between the two is filled with glass wool for heat insulation. It is easy to handle table model working on 220 Volts, 50 Hz single phase AC.
Output Capacity per hour (Approximately)
a) 4-5 litre, b) 8-9 litre, c) 15-16, d) 25-26 litre

DOUBLE DISTILLATION STILL 6756
Stainless steel, output approximately 6-8 litres per hour of double distilled water.

RECTANGULAR MUFFLE FURNACE (Laboratory Model) 6760
Outer shell out of thick mild steel duly finished in attractive stoving enamel paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temperature 1000ºC with working temperature 940ºC controlled by energy regulator. Complete with indicators, pyrometer, thermocouple - thermal fuse etc. workable on 220 Volts, 50 Hz single phase AC. Inner Muffle size in mm
a) 225x100x100
b) 250x125x125
c) 300x125x125
d) 300x150x150
e) 300x200x200
f) 350x175x125
g) 475x175x125
h) 450x225x225
OPTIONAL : (Extra Cost) Digital Temperature indicator-cum-controller instead of energy regulator and pyrometer.

MUFFLE FURNACE (Industrial) RECTANGULAR 6762
Specification as model 6760 but maximum temperature 1150ºC with working temperature 1100ºC. Complete in all respects as above. Inner muffle size in mm
a) 225x100x100
b) 300x125x125
c) 300x150x150
d) 300x200x200
e) 450x225x225
OPTIONAL: (Extra Cost)
Digital temperature indicator-cum-controller instead of energy regulator & pyrometer.

MAGNETIC STIRRER 6770
Compact stirring device utilizing a rotating magnetic field applied from below the container. The stirring is accomplished by a Teflon rotor placed in the liquid to be stirred. Complete with pilot lamp, plug cord, continuously variable speed regulator. The body is made of mild steel duly finished in stoving enamel and mounted with stainless steel top which serves as a hot plate. Stirring and heating units are properly insulated. In model with heating system temperature is controlled by a energy regulator. An electronic speed controller is also provided. The equipment works on 220V AC 50Hz single phase.
a) Magnetic stirrer with hot plate. Capacity: 1Lt. 2Lt, 5Lt., 10Lt.
b) Magnetic stirrer without heating system. Capacity: 1Lt, 2Lt, 5Lt, 10Lt
c) Magnetic stirrer with hot plate & energy regulator. Capacity: 1Lt., 2Lt, 5Lt, 10Lt, complete with Teflon coated magnet.

LABORATORY STIRRER 6775
Heavy & stable cast iron base duly painted with mild steel chrome plated upright rod. AC/DC motor with stainless steel stirring shaft and blades, variable speed control unit provided. 1/20 HP motor provided for smooth longtime stirring. Height of stirrer and stirring space adjustable. To work on 220 Volts 50 Hz single phase AC.

TISSUE HOMOGENISER 6778
Heavy stable cast iron base duly painted with mild steel chrome plated upright provided with strong adjustable clamps to hold motor with stirring rod of stainless steel with Teflon grinder and clamp to hold tissue homogenising vessel of borosilicate glass which is also adjustable. Speed variable through a control unit to work on 220 Volts, 50 Hz single phase AC. Motor used is of 1/20 HP
a) Homogenising Vessel 25ml.
b) Homogenising Vessel 50ml.
c) Homogenising Vessel 100ml.