INCUBATOR (Bio-Chemical Oxygen Demand) 6720
Designed for low temperature incubation and routine determination of Bio chemical
oxygen demand (B.O.D). Double wall construction. Inner chamber made of richly
anodized aluminium or highly polished stainless steel sheet with self supports
for wide range of shelf spacing. Supplied with two/three removable perforated
shelves. Exterior made of thick mild steel sheet duly finished in white stoving
enamel paint or paste mat finish colour combinations. Outer double wall door
is provided with magnetic gasket and lock & key arrangement. Inner door made
out of a clear acrylic sheet allowing inspection of material in the chamber without
disturbing the chamber temperature. Door operated inner illumination has been
provided. The gap between walls of equipments are filled with glass wool for
insulation. The cabinet is mounted on castors. Temperature is controlled by a
sensitive thermostat from 5ºC to 50ºC ±1ºC. For lower temperature
working a standard cooling unit with a sealed compressor with protective devices
has been provided below the chamber for safe and efficient working. Heating arrangement
has been made within the chamber for higher temperature working. The temperature
can be regulated within the range by means of high precision double action thermo-regulator.
Inner air circulating system is provided to achieve uniform temperature in the
whole chamber. A control panel is provided with various indicators, On-Off switch,
L-shaped thermometer. Supplied with cord and plug. The equipment is workable
on 220Volts, 50Hz single phase AC. Inner Chamber sizes in mm:
a) 610x455x410
b) 825x500x415
c) 865x565x565
d) 900x650x575
OPTIONALS : (Extra Cost)
i) Digital temperature controller-cum-Indicator.
ii) Timer 0-24 hours day night cycle.
iii) CO2 air mixture intel nozzle.
iv) Humidity system by spray or injection methods.
v) Audio Visual alarm.
vi) Automatic Voltage stabilizer 3KVA. (must)
ORBITAL SHAKING INCUBATOR 6723
a) Standard double wall construction. Outer chamber made out of mild steel
finished in stoving enamel paint. Inner-chamber made of stainless steel sheet.
The double door provided with double glass full view window. Interchangeable
platform has been provided. temperature range 5ºC above ambient to 60ºC ±2ºC
is controlled by a solid state electronic controller. Variable speed control
regulator controls the speed up to 200 rpm. Supplied complete to work on
220Volts 50 Hz single phase AC . Capacity: 16x500ml conical flasks.
b) Same as above but temperature range 10ºC to 50ºC with light arrangement.
SEROLOGICAL WATER BATH 6725
Double wall construction, inner being made out of highly polished thick stainless
steel and outer made out thick mild steel sheet finished in stoving white
enamel paint or staple mat colour combinations. The gap is filled with special
glass wool for temperature insulation. The bath is provided with a drain
cock to easily drain out the water and clean the chamber when required. A
pyramidal shaped cover is provided. Immersion type heating elements are fitted
at bottom. temperature range 5ºC above ambient to 80ºC with accuracy ±0.5ºC
to 1ºC is controlled by capillary thermostat regulated by a graduated
knob on the panel, which is also provided with pilot lamp etc. The equipments
is workable on 220Volts, 50Hz single phase AC. The baths are supplied without
thermometer and stirring arrangement. Working chamber sizes in mm (Stainless
Steel)
a) 300 x 175 x 175
b) 300 x 250 x 175
c) 375 x 300 x 175
d) 450 x 300 x 175
OPTIONALS: (Extra Cost)
i) Stirring arrangement with S.S. rod and blades.
ii) Digital temperature indicator.
iii) Digital indicator-cum-temperature controller.
WATER BATH RECTANGULAR (Thermostatic Control) 6727
Standard double wall construction, inner being stainless steel outer of mild
steel duly stoving paint finish and gap filled for temperature insulation
with special grade glass wool. top cover with 75mm holes with concentric
rings. temperature range 5ºC above ambient to 95ºC controlled by
a thermostat. Heating is attained by an immersion type element with accuracy
of ±1ºC. Supplied complete with plug & cord. Panel provided
with pilot lamps, thermostat control knob etc.
Models: a) 5 holes, b) 6 holes, c) 12 holes
WATER BATH RECTANGULAR (SINGLE WALL) 6729
Body made out thick stainless steel. top made out of chrome plated sheet. Concentric
rings to cover 3” dia holes are provided. Heating elements have automatic
cut-off device which operates when the bath gets dried. Equipment working
on 220Volts Hz single phase AC.
a) 6 holes
b) 12 holes
OPTIONALS : (Extra cost)
I) Digital temperature indicator.
ii) Digital temperature indicator-cum-controller.
WATER BATH PRECISION (CONSTANT TEMPERATURE CONTROL) 6730
Construction as per model 6729 but with glass windows on both opposite sides,
for observation. temperature controlled by mercury contact thermometer with
a sensitivity of 2ºC. Suitable for precision laboratory activities requiring
constant temperature with high degree of accuracy. Complete with stirrer
with speed control regulator workable on 220Volts Hz single phase AC. Chamber
Size in mm
a) 425x250x225
b) 450x375x375
c) 600x450x450
WATER BATH PARAFFIN 6731
Body specification as per standard double wall water baths but provided with
cups and sleeves for glass tubes.
Models:
a) 4 cups & 6 sleeves.
b) 6 cups & 8 sleeves.
c) 12 cups & 14 sleeves.
WATER BATH TISSUE FLOTATION 6734
Suitable to spread wax section ribbons after microtomy to get wrinkle free
specimen for staining. Double wall round construction. Inner chamber black
anodized aluminium and outer made out of mild steel duty finished in stoving
white enamel paint. Inner chamber is single stainless pieces to avoid chances
of any leakage with enough wide rim for drying wet slides. temperature range
5ºC above ambient to 70ºC ±2ºC. Immersion type heating
elements attain the controlled temperature regulated by a capillary thermostat.
Panel provided with thermo-regulator knob, pilot lamp and is supplied with
cord & plug. equipment workable on 220Volts Hz single phase AC. Chamber
sizes in mm & inches: a) 200x75, b) 250x125
OIL BATH (High temperature) 6736
Stainless Steel, Double wall construction. Inner chamber made of highly polished
stainless steel or copper sheet and outer made of mild steel duly finished
in stoving enamel. Temperature range 50ºC to 250ºC ±2ºC
is controlled by a thermostat. The oil bath is suitable for a wide range
of applications like oxidation stability test on oils, other tests in which
high temperature control is required. Supplied complete with stirrer, diffuser
shelves, cover etc. panel provided with On-Off switch, pilot lamps thermostatic
control knob etc. Chamber size in mm :
a) 250x250x250
b) 300x300x250
c) 350x250x250
OPTIONALS: (Extra Cost)
i) Mercury contact thermometer and relay with accuracy better than 1ºC.
ii) Digital temperature indicator.
iii) Digital temperature indicator-cum-controller instead of thermostatic control
and L-shaped thermometer.
OIL BATH (High temperature) 6737
As above, but with well type round body.
| 
