ASPIRATOR BOTTLES 6501
These Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable, & dependable. The leak proof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before. Capacity:
a 5 Ltr.
b 10 Ltr.

REAGENT BOTTLES (NARROW MOUTH) 6502
These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well empty. On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leak proof. Available in all standard sizes.

REAGENT BOTTLES (WIDE MOUTH) 6503
These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leak proof. Available in all standard sizes.

DROPPING BOTTLES 6504
Blow in Low Density Polyethylene, these Dropping Bottles dispense small uniform drops of liquids when pressed lightly. Capacity:
a 60ml
b 120ml

WASH BOTTLES 6505
These Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required. Capacity:
a 125ml
b 250ml
c 500ml
d 1000ml

WASH BOTTLES (NEW TYPE) 6506
These Bottles are also made of Low Density Polyethylene and are therefore translucent & unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece Wash Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed. Capacity:
a 250ml
b 500ml

BEAKERS 6507
These Beakers, moulded in Polypropylene have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout. Available in all standard sizes.

BURETTE 6508
This Burette has a transparent acrylic body and a leak proof stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofluoric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5% wt/wt of acids or 0% bases. Capacity:
a 25ml
b 50ml

MEASURING CYLINDERS 6509
These Measuring Cylinders mouled in Polypropylene, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability. Available in all standard sizes.

MEASURING JUGS 6510
These handy Jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading. Available in all standard sizes.

CONICAL MEASURES 6511
These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability. The Measure are clear, have good chemical resistance and have raised graduations for easy reading. Available in all standard sizes.

DESICCATOR (Vacuum) 6512
These Desiccators are made of Polypropylene and Polycarbonate. These autoclavable vacuum desiccators can hold vacuum up-to 740 mm of Hg for 24hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vacuum creation, shutting off & vacuum releasing. Each Desiccator is provided with a thick perforated Polypropylene disc with a big hole in the centre for easy lifting. The tiny holes in the disc provide air troughs & support to the dishes. However, porcelain discs are advisable in case of incandescent crucibles.

	Size inch	Flange OD mm	ID mm	Plate	Height	Max CI* mm
(a)	6	171	150	138	204	123
(b)	8	232	199	190	257	166
(c)	10	276	240	248	315	207

(*Maximum Clearance above plate in mm)

DESICCATOR (Plain) 6513
Plain Desiccators are physically the same as Vacuum Desiccators. Only difference is the absence of Stop cock. Grease should be applied on the flange to make it air tight.

	Size inch	Flange OD mm	ID mm	Plate	Height	Max CI* mm
(a)	6	171	150	138	204	123
(b)	8	232	199	190	257	166
(c)	10	276	240	248	315	207

(*Maximum Clearance above plate in mm)

COPLIN JAR 6514
Coplin Jar made of Polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.

SLIDE MAILER 6515
Slide Mailers present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in two sizes i.e. 2 slides & 5 slides.

SLIDE BOX 6516
These Slide Boxes are durable, compact & provide utmost protection to 1"x3" slides. Heavy walls will not wrap, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the slide box has a numbered index for easy slide Identification. Slides:
a 25
b 50
c 100

SYPHON 6517
These self priming Syphons can be used for pouring liquids from large containers to small ones without actually lifting them. Insert the open end of the tube in the liquid, close the stop cock and pump the bulb. As soon as the liquid enter the bulb, flow is automatically regulated. Stop pumping further. Liquids can now be dispensed by opening the stopcock. Size : 6mm

VOLUMETRIC FLASK 6518
Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity.
These autoclavable flasks are provided with screw caps to prevent leakage. Capacity:
a 25ml
b 50ml
c 100ml
d 250ml
e 500ml
f 1000ml

CONICAL FLASK 6519
Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving. Capacity:
a 100ml
b 250ml
c 500ml

FLASK STAND 6520
Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of Contact. This Flask Stand can hold round bottom Flasks up to 10Ltr. capacity. This stackable Flask Stand can also be steam autoclaved.

SEPERATORY FUNNEL 6521
Separatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable separating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of th seperatory funnel. Capacity:
a 100ml
b 250ml
c 500ml

FUNNELS - LONG STEM 6522
These long stem funnels have smooth walls, 60 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.

BUCHNER FUNNEL 6523
Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vacuum seal which does not require greasing. The base of the top portion has a perforated filter plate. Size:
a 70mm
b 110mm

PIPETTE PUMP 6524
This is a fast release pipetting device for precise pipetting & zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collect inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning. Capacity:
a 2ml
b 10ml
c 25ml

PIPETTE STAND (HORIZONTAL) 6525
This detachable Stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembled for space saving storage.

PIPETTE STAND (VERTICAL) 6526
This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14mm. The heavy base measures 225mm in diameter and a Polypropylene coated square rod measuring 375mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

PIPETTE STAND (94 PIPETTES-ROTARY) 6527
Moulded in Polypropylene, this unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

RETORT STAND 6528
These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand.

FISHER CLAMP 6529
These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

FUNNEL HOLDER 6530
Made of Polypropylene, these corrosion free Funnel Holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided to ensure grip on Rods having dia 1/2" or 3/8".

SEPARATORY FUNNEL HOLDER 6531
This non-corrosive Separatory Funnel Holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

TEST TUBE STAND 6532
This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25mm dia test tubes, four holes to hold 16mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25mm dia tubes. Particulars:
a 16mm & 25 mm dia test tubes
b 25mm dia test tubes

TEST TUBE STAND (Round) 6533
A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25mm dia holes & eight 19mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.

TEST TUBE STAND (3 Tier) 6534
These ingenious racks, moulded in Polypropylene & Polycarbonate, are excellent replacement for metal & wooden racks. The 3-tier design provides clear view of the tube contents and convenient insertion & removal of tubes. The PC rack has transparent upper and middle plats while base & end plates are coloured where as in PP racks, every part is coloured & opaque. End plates are provided with spaces to lift the rack and bas plate has tapered wells with drain hoes. These racks are autoclavable and can withstand sub-freezing temperatures.

TEST TUBE STAND (Wire Pattern) 6535
An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.

TEST TUBE BASKETS 6536
These Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation. Particulars
a 140x120x110 mm
b 160x160x160 mm

ATOMIC MODEL SET 6537
These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & inorganic compounds. Senior Set : This set consists of 150 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour and size of ball.
Junior Set : This set consists of 30 connecting lugs & 75 balls of different colours & sizes.

CRYSTAL MODEL SET 6538
These Crystal Model Sets contain different coloured jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.

RIA VIAL 6539
These Polypropylene/Polystyrene tubes are generally used in RIA, Coagulation & Bacteriology. The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstan 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organics solvents.

CENTRIFUGE TUBE CONICAL BOTTOM 6540
These Centrifugal tubes with conical bottom are available in two sizes, i.e. 15ml & 50ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15 ml & 50 ml tubes respectively. These tubes are available sterilized as well as non-sterilized.

CENTRIFUGE TUBE ROUND BOTTOM 6541
Centrifuge Tubes with round bottom are moulded in Polypropylene & Polycarbonate. These tubes have excellent clarity and are strong enough to be used upto 50,000xG. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical strength.

OAK RIDGE CENTRIFUGE TUBES 6542
Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can be used upto 50,000xG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 4ºC.

MICRO CENTRIFUGE TUBE 6543
These Micro Centrifuge Tubes, moulded in Polypropylene, have built in plugs which snap fit and make these tubes leakproof. These tubes can withstand high forces of an ultra centrifuge and can be used for transmitting samples for micro analysis.

RACK FOR MICRO CENTRIFUGE TUBE 6544
Moulded in Polycarbonate, this autoclavable rack is made for holding twenty four 1.5ml micro centrifuge tubes. This rack has a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.

FLOAT RACK 6545
This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.

SAMPLE CONTAINER 6546
These Sample Containers are made of Polypropylene. These thin walled, graduated, disposable containers are easily screw capped with less than 1/4" of a rotation. As one screw caps the container, the top of it sets in a domed ring in the cap making it completely leakproof. This is perhaps the ideal most option available for carrying samples from one place to another safe & sound.

SCINTILLATION VIAL 6547
These unbreakable vials, moulded in Polypropylene, are fitted with leak proof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.

RACK FOR SCINTILLATION VIAL 6548
These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both 8ml & 20ml vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations.

STORAGE VIAL 6549
As the name suggests, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -190ºC. The Cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack.

CRYO VIAL 6550
Cryo vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190ºC. These tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudinal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.

CRYO CODERS 6551
These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different mples.

CRYO RACK 6552
Cryo Rack is moulded in Polycarbonate making it tough, durable and autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.

CRYO BOX 6553
Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accomodate 81 Cryo Vials of up to 4.5 ml capacity and are designed to be used at temperatures ranging from -190ºC to +121ºC. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.

MICRO TIP BOX 6554
These unique boxes are moulded in Polypropylene and are therefore autoclavable. The Box itself is clear providing an excellent view of the tips inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.

PETRI DISH 6555
These Petri Dishes moulded in Polypropylene are clear & unbreakable. The moulding material being Polypropylene, these can be repeatedly autoclaved. The ridges on the inner side of the cap prevent the base from sticking to the cap.

PETRI DISH (DISPOSABLE) 6556
These transparent, ready to use, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Petri Dishes packed individually in polyethylene bags are sterilized by radiation.

RACK FOR PETRI DISHES 6557
This Rack is a clear acrylic construction with white Polycarbonate Posts. It has a capacity to hold 60 petri dishes of 90mm size. This rack is very useful during inoculation, incubation & storage. Visibility from all sides enables the culture to be seen & checked during incubation.

IMMUNOLOGY PLATES 6558
ELISA/ASSAY plates are made of optically clear, non-toxic Polystyrene and are ideal for a wide range of applications from single cell isolation to cell culture scale up. These plates are available with 96 flat bottom wells or 96 U bottom wells. These plates bear alpha-numeric index for easy identification of a particular well. All the 96 wells are uniformly placed in a manner so as to facilitate the use of multi channel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.

KIPP’S APPARATUS 6559
Kipp’s Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the Apparatus. H S gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.

SIMPLE CELL POT 6560
Simple Cell Pot, as the name suggests, is used for making Simple Cells & Voltmeters etc. Moulded in Polypropylene, this Pot has very good contact clarity and excellent chemical resistance. Being in Polypropylene, this Pot is much durable than the one used conventionally.

LECLANCHE CELL POT 6561
Blown in Polypropylene, this Pot is used for making Leclanche Cell. This Pot too has very good contact clarity & excellent chemical resistance.

SPATULA 6562
Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.

CONNECTORS 6563
Moulded in Polyethylene, these Connectors are basically pipe-like structures in T&Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edges prevent leakage and slippage.

SLIDE DISPENSER 6570
Holds up to 70 slides, 76 x 26mm length x width stacked inside the clear acrylic cover. Slides are dispensed by turning the knob on either side. Dimensions:
Slide holder: 75x35x 70mm Width x Depth x Height.
Overall length from the base 140mm.
Base: 100x120 mm Width x Depth.

ANIMAL CAGE 6572
Strong resilient cage body is moulded in polypropylene for its superior chemical resistance to urine and other body fluids. The body has rounded corners for easy cleaning and to avoid food entrapment and other contaminations. Size : (a) 430 x 270 x 150 mm (b) 290 x 220 x 140 mm.

MICRO PIPETTE 6580
Three models : 5-40, 40-200, 200-1000. Ergonomic design, light weight construction reduces stain on your hand. Piston action smooth and controllable. Two step operation reduces use of reverse pipetting from same tip. Ensure last drop dispensing. Click stop with automatic locking system on upper volume. It clicks to desired volume and stays there even after large number of dispensing. Highest level of accuracy and precision. Accuracy 0.5% to 0.6%. Also available in fix volume pipettes.

MAGENTA BOX 6585
Magenta box is very often used in tissue culture & agricultural research experiments. Main body of this box is made of tough & transparent polycarbonate which provides excellent view of the contents inside while the cover is made of Polypropylene. This autoclavable box is square in shape giving itself a space saving feature.