INSECT NET 8010
Very beautiful collapsible design, light weight, convenient to carry in bag. Fine synthetic netting mounted on wire ring, gripped to handle by fly-nut removable rod and hand grip.
(a) Ring dia 250mm
(b) Ring dia 300mm

INSECT NET 8012
Replaceable stout ring with fly nut grip. Bag of fine synthetic netting mounted on ring. Handle made of light C.P steel either folding type for convenience.
(a) Ring dia 300mm
(b) Ring dia 375mm

PLANKTON NET 8018
Made of silk bolting net 875mm, long, net suspended by muslin reinforcement. Three braided lead attached to swivel front. Rear of bag with 50mm opening for glass vial collection of plankton.
(a) Ring dia 250 mm
(b) Ring dia 300 mm.
(c) Ring dia 375 mm.

AQUATIC NET 8020
Strongly built for sweeping up aquatic insects and as general utility aquatic net. Removable, rigid D shape frame 300mm across silk bolting mesh bag with end reinforced with metal ferrule and with a strong grip. NOTE: Spare bag for above required to replace torn and old one can also be supplied at extra cost on request.

INSECT COLLECTING BAG 8022
Made of best quality canvas having two side pockets for keeping bottles two front pockets for two bottles, 6 Glass Tubes, 6 Specimen Tubes Inner partition and adjustable strap. Supplied without accessories.

VASCULUM 8025
An oval shape metal case, painted outside and blackened inside to prevent rusting with hinged door and sliding catch with shoulder strap.
Dimensions: 325 x 160mm.

POOTER 8026
For collecting flies, spiders and other small arthropods. Comprises glass specimen tube, 75x25mm height x diameter, with inlet and outlet tubes via a rubber stopper. Collecting tube has flared end and mouthpiece has a rubber tube connection. A gauze filter confines collected specimens to the tube.

SPECIMEN TUBES 8030
Specimen tube transparent with poly cap. Height x Diameter (a) 50 x 25mm
(b) 75 x 25mm
(c) 100 x 25mm
(d) 75 x 75mm
(e) 100 x 32mm
(f) 75 x 37mm
(g) 100 x 37mm

CAVITY SLIDES 8035
Thickness 1.35mm, Size 75 x 25mm
(a) One Con-Cavity
(b) Two Con-Cavity
(c) Three Con-Cavity
Thickness 3mm, Size 75 x 56mm
(d) 6 Con-Cavity
(e) 8 Con-Cavity
(f) 10 Con-Cavity
(g) 12 Con-Cavity

SLIDE BOXES 8040
Teak wood with hinged lid sunmica top. Slides are held in numbered slots and there is an index inside the lid. With wooden/AI/Plastic rails.
(a) Capacity 100 slides.
(b) Capacity 50 slides.
(c) Capacity 25 slides.

MICROSCOPE SLIDE FOLDER 8044
To hold 20 slides in flat position. Wooden with file-type hinged and frame with 20 compartments of die-cut hardboard, serially numbered with velvet cushined bottom. Nicely Polished.

MICROSCOPE SLIDE TRAY ALUMINIUM 8046
Aluminium, to hold 20 slides flat. Die-pressed anodized aluminium sheet, can be used in oven for drying the slides.

MICROSCOPE SLIDE CABINET 8050
The cabinet is clad in laminated sheet. Dust proof door with lock. The drawers are made of teakwood having wood grooves each serially numbered, bottom lined with velvet, provided with index card frame and puller knobs. Lever lock to prevent drawer taken out accidently. An extra drawer with index cards. Moisture proof lacquered finish.

CAPAITY DRAWERS SLIDES 8051
(a) 500 - 5 - 100
(b) 1000 – 10 - 100
(c) 2000 – 10 - 200
(d) 5000 – 25 - 200
(e) 10000 - 50 - 200
(f) 15000 – 60 - 250

MICROSCOPE SLIDE CABINET 8055
A unique combination of storing the slides in flat as well as vertical position. Clad in laminated sheet. Concealed type lockable door. One half fitted with aluminium trays of 20 slides each in flat position. The other half carries drawer to hold slides in vertical position, all serially numbered. With index card frame and puller knobs. Extra drawer with index cards, lacquer finish. Total Capacity - Flat - Vertical
(a) 1000 – 400 - 600
(b) 1600 – 600 - 1000
(c) 2000 – 800 - 1200

INSECT SETTING BOX 8056
Seasoned teakwood frame with finger joint and plywood bottom and top. The inner top and bottom have 5 or 6mm papered cork sheet for pinning. Fumigation Chamber perforated for pesticide. Lacquer finish. Sizes
(a) 450 x 300 x 75mm
(b) 375 x 250 x 75mm
(c) 300 x 225 x 75mm

INSECT SETTING SHOWCASES 8057
Seasoned teakwood frame with finger joints. Plywood bottom. Non-rattling glass in wooden frame top. Bottom has thick papered cork-sheet for pinning. Fumigation chambers perforated for pesticide, provided with two brass clips and index card frame. Moisture proof lacquer finish. Sizes
(a) 600 x 450 x 75mm
(b) 450 x 300 x 62mm
(c) 375 x 250 x 62mm
(d) 300 x 225 x 62mm

SLIDE CABINET (Unit System) 8058
Equipped with 25 aluminium trays for holding 500 (3" x 1") slides in flat position. The front lockable door slides into the top of the cabinet. Additional units can be stocked on the top.

INSECT SETTING SHOWCASE 8060
Showcase are made of seasoned teakwood, removable glass frame top. Bottom has 5 or 6mm thick papered cork-sheet for pinning. Double walled provide fumigation chamber perforated for pesticides provided with puller brass knobs and card frame. Moisture proof lacquer finish. Size: 562 x 500 x 75mm

INSECT SPREADING BOARD 8062
Made of teakwood covered with 5mm thick papered cork-sheet. Smoothly adjustable groove from 0 to l2mm, chrome plated brass fittings. Nicely polished. Size: 350 x 112mm. Length x Width.

MICROSCOPE SLIDE 8070
PlaIn slides 75x25mm with ground edges. Ready for use, pack of 72 slides.

COVER GLASSES 8071
Cover glasses No. 1. Pack of 10 gms
a. l6mm dia
b. l8mm dia
c. 22mm dia
d. 18 x l8mm
e. 22 x 22mm

STAINING BOTTLE RACK 8074
Polished hardwood for twelve 30 ml staining bottles.

STAINING JAR 8077
Glass jar with moulded glass cover. Takes 10 slides 76 x 28 mm back to back.

CAVITY BLOCKS 8078
Block form with cavity, complete with cover glass.
(a) 60 x 60mm
(b) 40 x 40mm

LABELS, MICROSCOPE SLIDE 8080
Self-adhesive and ruled, square, side 25mm pack of 100 labels.

DISSECTING DISH 8082
Dissecting Dishes Aluminium. Made from aluminium sheet with flanged edges complete with wax. Bottom Length x Width x Depth.
(a) 250 x 200 x 60mm
(b) 300 x 250 x 75mm

DISSECTING DISHES ENAMELED 8084
Steel white enameled inside and outside, rectangular with flanged edges. Complete with wax. Bottom Length x Width x Depth
(a) 250 x 200 x 60mm
(b) 300 x 250 x 60mm

OPTIVISOR (Head Band Magnifier) 8090
A headband magnifier which will greatly facilitate fine or close work

PARALLEL ARM MAGNIFIER 8095
A high power l00mm dia. magnifying lens mounted on a stand which keeps the lens parallel to the work plane when it is slided between arms, Heavy cast base provides stability.

DISSECTING MICROSCOPE 8097
A versatile instrument for fine dissection work. The high eyep-oint lens (either 10X or 20X) is mounted on a jointing arm allowing the whole stage area to be scanned. The wide glass stage has two spring clips and a reversible sub-stage mirror/opal face illuminator. Focusing is by a rack and pinion mechanism and detachable rests on either side of the stage provide a steadying support for hands during fine dissection. All metal construction. Supplied complete with X10 and X20 lenses in a wooden cabinet.
Dimensions: Overall height 180mm. approx. Stage 65 x 85mm

HAND MICROTOME ROUND (AS PER HARRIS) 8101
Sample to be sectioned is supported in styropith or other material and placed in a central well. Turning a milled knob at the base of the microtome raises the sample, and sections can be cut from the top using a razor. Screw has l9mm overall movement with click stops at 20mm intervals. Top diameter 63mm, well diameter 22mm.

RAZOR (for above) 8102
A high quality carbon steel single edge razor with folding cover.

HAND MICROTOME, BOX TYPE 8104
With table clamp for cutting the paraffin embedded specimens up to 50 microns in increments of 5 microns. Body is of cast aluminum alloy 150x75x60mm with corrosion resistant oven baked finish having a stainless steel top plate, housed in polished wooden case. Supplied with table clamp fine brush and 4 plane slides plus 1 pkt. of razor blades.

ROCKING MICROTOME 8109
Ideal for student use and routine work. It will cut ribbons of sections from specimens of dia up to 20mm, and using wooden blocks section of specimens up to 18 x 25 mm may be cut. Supplied with object holder, knife and honing stone.

ROTARY MICROTOME 8110
It is of immense use for Medical Institutions, Research Laboratories etc. and gives very good results for cutting thin sections. It is mounted on a heavy cast iron base to ensure rigidity and long life. The housing gives maximum protection to the mechanism against dust and paraffin waste etc. It is driven by handle which can be locked in position. The cutting sections obtained by mechanically operated crank can be adjusted in steps of 1u to 25u by means of a knurled knob on the front of the instrument.
The efficient ball and socket clamp renders possible to interchange specimen clamp and paraffin stage with a single motion. The instrument is equipped with a rotating knife, honing plate, three object holders and oil-can.
Specifications: Feed adjustment: 1-25 micron (in step of 1 micron).
Opening of object stage: 30x15mm Overall height: 260mm
Size of case: 500 x 400 x 350mm Weight: 30Kg approx.

ROTARY MICROTOME (Precision) 8116
A heavy base with hinged cover for protecting the interior mechanism, and knife holder. With every complete revolution of the drive wheel, the feed panel engage the teeth of rachet wheel which advances the object holder through cone and inclined plane mechanism, tissue sections can be cut down to even 1 micron. A safety device automatically disengages the feed mechanism at the end. Feed indicator is in front and feed setting is at the back of Microtome which sets 1 to 50 micron. A razor 120mm made from High carbon steel and tested for Micro structure is supplied with instrument. There is an arrangement to tilt angle of the razor adjustable up to 30º on a reference scale. Technical Features:
Feed adjustment: 1-50 Micron (in step of 1 micro)
Total feed excursion: 28mm opening of object clamp.
Hall and flange type: 37 x 25mm,
Overall dimensions: 400 x 250 x 175mm. Weight: 25 Kg. approx.

FREEZING MICROTOME 8118

CRYOSTAT MICROTOME 8120

MICROTOME RAZOR SHARPENER (Automatic) 8122

TISSUE PROCESSOR (Automatic) 8025
For micro-slides tissues staining process atomisation.

MAGNIFIERS (Reading Glass) 8130
In metal nickel plated frame with bakelite/metal handle. Packed in card board box.

	Diameter mm	Focal Length cm	Magnification
(a)	40	10	3.5X
(b)	50	12.5	3X
(c)	50	15	2.5X
(d)	60	12.5	3X
(e)	75	15	2.5X
(f)	75	12.5	3X
(g)	75	15	2.5X
(h)	75	20	2.25X
(i)	100	15	2.5X
(j)	100	20	2.25X

MAGNIFIER POCKET 8134
In Consisting of a pair of plano-convex lenses mounted in a bakelite body in such a way that the distoration at the edge of the field is reduced to minimum. Lenses mount folds into case. Clear diameter of the lenses 19 mm approx. Magnification X10.

ENTOMOLOGICAL PINS STORAGE BOX 8140
Made of wood with 6 holes to store different sizes of entomological pins and keep the same handy.

FUMIGATION CHAMBER 8146
Versatile chamber for fumigating for sterilization and disinfection of Clean room, Clothes, old books and literature etc. Fabricated out of thick seasoned board clad in Mica lamination on all sides. Front and back are of glass for proper visibility. Top provided with cover tightened with clamps. Fitted with high quality fume circulator. One drawer is provided for keeping petri-dish for fumigants. Inner chamber Epoxy painted. Equipment provided with castor wheels for easy movement.

FUMING HOOD 8148
Fume exhaust hoods are designed to contain and exhaust toxic, obnoxious or otherwise harmful gases, vapours, mist etc. to protect personal and equipment. A motor driven blower creates negative pressure within the chamber extracting the contaminated air from work area and expel it into the atmosphere. The hood is ventilated to the air drawn for inside the Laboratory which is used effectively for thorough sweep-out of work chamber.

Fabricated out of best quality, thick weather-resistant Duro-board clad in mica Lamination from outside, inner chamber finished in chemically resistant Epoxy paint. Work surface is made of steel. An up & down sliding Sash mad of thick seasoned Teak-wood and mounted with heavy glass is duly polished. Fluorescent tubes or economical compact fluorescent light (CFL) with built-in Magnetic ballast are fitted for lighting the work area. A gas tap and a electric plug is also provided. A working tray made of asbestos or Stainless Steel is also supplied with the Equipment. A work bench/Table (optional) to install the equipment any where in the lab. Can be supplied. The work bench is fabricated out of square steel pipe or hard wood and has a cupboard and a drawer. It is nicely painted. Optional:
(i) Exhaust ducting dia 3" 4" 5" rates per running it.
(i) Ereon charges : negotiable
(iii) CFL-11W/220V, light 75W life-10,000 burning hrs. with magnetic ballast extra.

FUMINGATION CHAMBER 8150
Versatile chamber for fumigating for sterilization with insecticide for preservation clothes , plants, old books etc. Made of sturdy board , mica covered , Epoxy coated from inside with fume circulator of electric motor. Top cover tightened with clamps. One drawer is provided for keeping petri -dish for fumigants chemicals. Castor wheel provided for Easy movement .Chamber Size mm
a. 900 x 600 x 800
b. 750 x 500 x 650
c. 500 x 400 x 550

INOCULATION CHAMBER 8152
Economical equipment for transfer of material/tissue and to be used as dry-box and dust proof environmental enclosure. Fabricated out of seasoned board clad in Mica laminated. Provided with covered rectangular opening for transfer of material and with two circular coverable holes for handling with hands above which a fixed glass window has been provided for viewing operations. Inside of chamber is painted with Epoxy paint. Provided with fluorescent tube or compact fluorescent lamp (CFL) with built-in Magnetic Ballast (Adaptor). Germicidal Ultra Violet (UV) tube has also been provided.

INSECT LIGHT TRAP 8156
Fabricated out of M.S. sheet with a box at the bottom for killing bottle and tray. Funnel measuring 30x5cms. comes to the box size 40x40x25cms. for convenient collection of trapped insects. Size of the tumbler is 25x40cms. It is provided with shaded bulb covering the complete area of the equipment & five meter long electric cord with bulb. The unit is finished in synthetic paint.

LITRATURE REPRINT PAPER BOX CABINET 8158
Cabinet made out of sturdy board & clad in mica lamination with lockable glass door. Cabinet is safety and systematic manner individually labeled reprint box
a. with 24 boxes
b. with 30 boxes
c. with 36 boxes

PLANT PRESS (Herbarium) 8161
The unit is very light and handy for field use. Made of reinforced wooden frame. Sufficient and uniform pressure can be applied by means of strong belts provided on it. The unit is finished in green Duco paint.

PROJECTION SLIDE BOX 8162
For 35mm film slides. Frame fabricated out of Teak wood with tongs & grooves type joints. 50 X50 mm plastic or card cover in vertical position wooden grooves serially numbered are fitted on cushioned bottom . Inner side of the lid is pasted with index sheet .All fittings like hinges and clips are made of brass . Nicely polished. Capacity:
a. 200 Slides
b. 100 Slides
c. 50 Slides
d. 25 Slides

PROJECTION SLIDE SORTER 8164
For 2" x 2" Projection Slides. This rack type equipment has been designed to facilitate to quickly identify and sort projection slides. An adjustable magnifier has been provided with ledges to hold 35 slides at a time, is illuminated from within the chamber by a fluorescent tube or economical compact Fluorescent (CFL) with built-in magnetic Ballast.

LAMINAR AIR FLOW MODULE (Horizontal) 6875

Model	a	b	c	d	e
Working Area in Ft	2x2x2'	3x2x2'	4x2x2'	6x2x2'	8x2x2'
H.E.P.A. Size in Ft	2x2x6	3x2x6	4x2x6	3x2x6	4x2x6
No. of H.E.P.A.	1	1	1	2	2
No. of Prefilters	1	1	2	2	3
Lighting	1x20W	1x20W	2x40W	2x40W	4x40W
CFL	11W	11W	2x11W	2x11W	4x11W
UV Tube	1x1½'x15W	1x1½'x15W	1x3'x30W	2x3'x30W	2x3'x30W
Gas Cock	1	1	1	1	1
Manometer	1	1	1	1	1

Optional :
(i) S.S. Table top in lieu of Mica (Extra)
(ii) Exhaust system complete with blower and ducting fittings (Extra).
(iii) Voltage Stabilizer : Suitable to above models.
Spare Accessories :
(i) Hepa filter : 2' x2'x2" 3'x2'x6" 4'x2'x6"
(ii) Pre-filters : 2'x2'x2" 2'x1½'x2"
(iii) UV Tube : 1½' x 15W 3' x30W (with fittings)
(iv) Compact Fluorescent lamp (CFL) : 11W/220V-Light 75W, Life-10,000 burning hrs. (a) With Magnetic Ballast (b) With Electronic Ballast
(v) Manometer : Acrylic block type, accurately calibrated with brass fittings complete.
(vi) Gas Cork : Brass duly chrome plated.
(vii) Gas Burner : Brass Superior quality.

LAMINAR AIR FLOW MODULE (Vertical) 6876
Same as above, but Vertical Type Module.

LITERATURE REPRINT BOX STORAGE CABINET 8174
Cabinet safety and systematically store individually labeled Reprint boxes is made out of sturdy board and is clad in Mica lamination with lockable front door with glass
a. with 12 boxes in two shelves
b. with 18 boxes in two shelves
c. with 24 boxes in two shelves

TABLE DESK CUM TRACER 8176
Cutely & scientifically designed for prolonged table work and tracing job. Provided with removable shaded tube light and a tube light below the frosted glass for tracing work. Second half is provided with lockable cover for keeping important documents. Provision has been made for keeping pens, pencils etc. Long Life and economical Compact Fluorescent Light(CFL) with built-in Magnetic Ballast can be provided with clips. Box is provided with label.

TEST TUBE STAND (ALUMINIUM) 8180
Fabricated out of thick aluminium sheet by die-press system and are richly anodized. The test tube stands are made in 3-tiers, available hole dia 10mm, 12mm, 15mm, 18mm, 25mm in No. of holes in any hole dia 12,18,24, 36, 48, 42, 100.

TISSUE WAX BLOCK CABINET 8184
Cabinet fabricated out of thick board and is clad externally in Mica lamination sheet. Lockable door is dust proof. The cabinet has drawers with 15 compartments each of 4'x4x2" suitable to store 32 block of 1x 1" in two layers. Each drawer has two puller knobs. Storage Capacity x Drawers
a. 20000 blocks x 4
b. 20000 blocks x 6
c. 5000 blocks x 10
d. 10000 blocks x 12
e. 15000 blocks x 30
f. 20000 blocks x 40

PROJECTION SLIDE CABINET 8185
For 35 mm film slides. Cabinet made out of the thick board clad in mica lamination. Lockable door. Drawers to hold 50 X 50 mm Plastic or card cover projection slides in wooden grooves serially numbered. Drawers made of Teak wood well polished. An extra drawer is provided to keep index Card sheet etc. Drawers x Grooves x Storage Capacity
a 5 x 120 per drawer x 600 slides
b. 5 x 200 per drawer x 1000 slides
c. 10 x 200 per drawer x 2000 slides
d. 10 x 300 per drawer x 3000 slides

INSECT SPREADING BOARD BOX 8187
Box fabricated out of seasoned wood with tongs & grooves type joints. Inner of lid and bottom of box fitted with 12 batton covered with non-scarcing washable, synthetic EVA sheet suitable for repeated pinning without leaving pin marks and have been provided with brass fittings for groove adjustment up-to 12mm for various sizes of Insect abdomen. A collapsible handle has been provided for carrying the box to the field.

BIO VIEWER 8190
This a Microslide/Photo-Micrographic Transparencies Viewer at low magnifications especially. The wholemounts to 50,000X. It is not a microscope, but a macroscope. Hands of teaching aid for individual study. No electricity, batteries, lab or special skills required no mirrors, no critical focusing. Made of high impact non breakable plastic. Two adjusting tubes enable focusing in ambient light completely washable.

CLINOSTAT ELECTRIC 8195
For demonstration of heliotropism and geotropism. Germinating seedlings are pinned to the cork table which is rotated by an electric motor at 5 revolutions per hour, and rated 220-240V, 50-60Hz, 5W. The motor is spindle mounted and may be clamped by a thumbscrew so that the plane of the table can be set at any angle. Slow rotation in the vertical or horizontal planes cancel out the effect of gravity and directional light. A Plastic cover is provided for the cork table to shield the seedlings from draughts. Diameter of cork disc is about 100mm.

FARMER'S POTOMETER 8196
Comprises a narrow bore bent glass tube clipped to a scale 0 to 30cm x 1mm and fitted by a rubber stopper in a wide mouth bottle. The stopper is also fitted with a dropping funnel and has a hole to take the stem of a plant.

GANONG'S POTOMETER 8196
Comprises a graduated, narrow bore, horizontal glass measuring tube with a vessel for a plant shoot at one end and having a vertical limb with a stopcock and a funnel fitted by a ground glass joint. Mounted on a wooden stand. For Demonstration, of transpiration rates and rates of water absorption by a cut shoot under various external conditions. A plant shoot is sealed into a stopper which fits the end tube, and the whole apparatus is filled with water, the open end of the capillary tube, which is graduated in millimetres, dipping into a beaker of water. The position of the air bubble may easily be adjusted by opening the glass stopcock to admit water from the central reservoir. The whole apparatus is mounted on a varnished wooden base by spring clips. Comprises a graduate, narrow bore, horizontal glass measuring tubes with a vessel for plant shot at one end and having a vertical limb with a Teflon stopcock and a funnel fitted by a ground glass joint. Height to top of reservoir 170mm, Diameter of reservoir 20mm Length, overall 320mm, Base 320x80mm (L x W), Capillary bore 1mm.

OSMOSIS APPRATUS 8197
This apparatus is designed for exploring the phenomena of osmosis and concept of osmotic pressure at elementary levels. Comprises a semipermeable membrane sealing the open mouth of thistle funnel having an indicator tube, which can be positioned in a reservoir. Supplied complete with dropping pipette.

DARK GERMINATION CHAMBER 8199
For experiments in phototropism with seedlings. Three-chambered case of wood with to accept a variety of shutters. The right-hand chamber has windows in the top and back end, when used with a clear front window, acts as a control chamber. Supplied with opaque shutter, a slot shutter to admit light from one direction only, the clear windows for the control chamber, one orange and one blue filter to show the effect of excluding various parts of the spectrum. Complete with three glass containers for seedlings. Dimensions overall 180 × 530 × 180mm approx. (height × width × depth).