MULTI PROCESS TRAINER 3426
The setup consists of supply water tank fitted with pumps for water circulation.
Level sensor transmitter is fitted on transparent level tank. The water flow
in different lines is sensed with orifice meter and differential pressure transmitter.
The flow rate is controlled by pneumatic control valve. Rotameters are used for
flow monitoring. These units along with necessary piping are mounted on stand
alone type structure. The process parameters are controlled through computer
by PID algorithms. Different experiments like Flow, level, cascade, feed forward,
ratio control can be configured and studied.
INTERACTING & NON-INTERACTING SYSTEM 3428
The set up is designed to study dynamic response of single and multi capacity
processes when connected in interacting mode. It is combined to study 1)
Single capacity process, 2) Non-interacting process and 3) Interacting process.
The observed step response of the tank level in different mode can be compared
with mathematically predicted response.
Setup consists of supply tank, pump for water circulation, rotameter for flow
measurement, transparent tanks with graduated scales which can be connected
in interacting and non-interacting mode. The components are assembled on frame
to form tabletop mounting.
DCS TRAINER 3429
The set up is designed to understand the latest techniques adopted in process control. The concepts of DCS, hybrid controller and SCADA can be well understood. Set up consists of Honeywell make Hybrid Controller, a control panel for simulating inputs as well as connecting real time process, software package for configuring the controller and a SCADA package.
Easy to use Windows based Hybrid control designer software, operable over Ethernet, an RS232 port or modem connection, simplifies controller and operator interface configuration. It provides advanced monitoring functions for debug, allows run-mode configuration changes while limiting process interruption uploads the complete, annotated graphic controller and operator interface configuration, plus supplies an array of printouts for enhanced documentation. The components are assembled on frame to form tabletop mounting.
UNIVERSAL PROCESS CONTROL TRAINER 3430
Universal Process Control Trainer Code 330 resembles a typical small industrial process plant with different processes and parameters. The plant is controlled using DCS control (Hybrid controller) with SCADA software for supervisory control systems. A jack plug and socket patch board provided at the interface of the process facilitates configuration of different experiments and allows user to develop and test own control strategies. The patch board also allows direct access to transmitters and control elements enabling user to connect external controllers, PLCs & DCSs. The product layout is designed to educate, train and develop the user to cover various aspects of process control. User can configure the product from study of basic components to advanced study of complex process control loops using advanced DCS control.More than 25 different experimental configurations are incorporated to support the study. The product allows user to experience the feel of physical use of industrial components and processes, routing the flow for intended configuration and observing the process controllability. The set up is connected to computer through USB port for monitoring and control by using PID logics.
LEVEL MEASUREMENT 3431
Level measurement setup is designed to demonstrate principles of liquid level measurement a) by air purge method and b) by use of differential pressure transmitter. The set up consists of Air pump, air purge tube, manometer, transparent process tank marked with graduated scale, supply tank, pump for water circulation, differential pressure transmitter (DPT) and level indicator.
The process tank is and provided with drain valve. The level in the tank is displayed on digital indicator. The DPT is powered by the digital indicator and provision is made to tap and measure the loop current. The units are fitted on support housing designed for tabletop mounting.
Non Linear Level Control 3433
Non linear level control is designed for understanding the principles of non linear level control. The process setup consists of SS spherical tank, and conical process tanks and supply water tank with pump for water circulation. A pneumatic control valve with I/P convertor manipulates the water flow in to the process tank. These units along with necessary piping are fitted on support housing designed for tabletop mounting. Level transmitter is used for sensing level in the process tanks. The product interfaces with computer through NI USB DAQ card and controlled by specially developed control software.
INTERNAL COMBUSTION ENGINES
ENGINE TEST SETUP, Computerised 3458
With Engine Indicator - The setup consists engine connected to rope brake type
dynamometer. It is provided with necessary equipment and instruments for
combustion pressure and crank angle measurements. These signals are interfaced
with computer through engine indicator for PO diagram, PV plot and engine
indicated powre. The setup enables study of engine for indicated power, brake
power, thermal efficiency, volumetric efficiency, fuel consumption, air fuel
ratio etc. The software package is fully configurable. The PO diagram, PV
plot and performance curves are obtained at various operating points.
ENGINE TEST SETUP, (Manual) 3459
Single Cylinder, Two Stroke, Petrol - The setup consists single cylinder, two
stroke, petrol engine connected to rope brake type dynamometer mounted on
rigid base frame. The set has standalone type independent panel box consisting
of air box, fuel tank, manometer, fuel metering tube, speed indicator and
temperature indicator. The engine can easily be started and put in to different
gears during test run. It can be subjected to different loads for performance
study. SALIENT FEATURES: Digital speed & temperature indication. Compact
setup - Calculation software for performance analysis.
ENGINE TEST SETUP 3460
With Engine Indicator Computerised Setup - The setup consists engine connected
to rope brake type dynamometer. It is provided with necessary equipment and
instruments for combustion pressure and crank angle measurements. These signals
are interfaced with computer through engine indicator for PO diagram, PV
plot and engine indicated power. The setup enables study of engine for indicated
power, brake power, thermal efficiency, volumetric efficiency, fuel consumption,
air fuel ratio etc. The software package is fully configurable. The PO diagram,
PV plot and performance curves are obtained at various operating points.
ENGINE TEST SETUP 3461
Four Cylinder, Four Stroke, Petrol Manual Setup - The engine under test is
connected to hydraulic dynamometer with carden shaft. The setup is mounted
on rigid base frame. It is provided with necessary equipment and instruments
for air, fuel, water, temperatures, speed and load measurements. Digital
indications are provided for temperature, speed and load. The setup enables
study of engine for power, thermal efficiency, volumetric efficiency, heat
balances, fuel consumption study etc. The performance curves can be plotted
at various operating points.
ENGINE TEST SETUP 3463
Single Cylinder, Four Stroke, Diesel Manual Setup - The setup consists single
cylinder, four stroke, diesel engine connected to rope brake type dynamometer
mounted on rigid base frame. The set has standalone type independent panel
box consisting of air box, fuel tank, manometer, fuel metering tube, speed
indicator and temperature indicator. The engine can be subjected to different
loads for performance study. SALIENT FEATURES: Digital speed & temperature
indication. Compact setup -Calculation software for performance analysis
| 
