PIPETTE STAND (HORIZONTAL) 6525
This detachable Stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembled for space saving storage.

PIPETTE STAND (VERTICAL) 6526
This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14mm. The heavy base measures 225mm in diameter and a Polypropylene coated square rod measuring 375mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

PIPETTE STAND (94 PIPETTES-ROTARY) 6527
Moulded in Polypropylene, this unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

RETORT STAND 6528
These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand.

FISHER CLAMP 6529
These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

FUNNEL HOLDER 6530
Made of Polypropylene, these corrosion free Funnel Holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided to ensure grip on Rods having dia 1/2" or 3/8".

SEPARATORY FUNNEL HOLDER 6531
This non-corrosive Separatory Funnel Holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

TEST TUBE STAND 6532
This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25mm dia test tubes, four holes to hold 16mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25mm dia tubes. Particulars:
a 16mm & 25 mm dia test tubes
b 25mm dia test tubes

TEST TUBE STAND (Round) 6533
A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25mm dia holes & eight 19mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.

TEST TUBE STAND (3 Tier) 6534
These ingenious racks, moulded in Polypropylene & Polycarbonate, are excellent replacement for metal & wooden racks. The 3-tier design provides clear view of the tube contents and convenient insertion & removal of tubes. The PC rack has transparent upper and middle plats while base & end plates are coloured where as in PP racks, every part is coloured & opaque. End plates are provided with spaces to lift the rack and bas plate has tapered wells with drain hoes. These racks are autoclavable and can withstand sub-freezing temperatures.

TEST TUBE STAND (Wire Pattern) 6535
An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.

TEST TUBE BASKETS 6536
These Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation. Particulars
a 140x120x110 mm
b 160x160x160 mm

ATOMIC MODEL SET 6537
These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & inorganic compounds. Senior Set : This set consists of 150 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour and size of ball.
Junior Set : This set consists of 30 connecting lugs & 75 balls of different colours & sizes.

CRYSTAL MODEL SET 6538
These Crystal Model Sets contain different coloured jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.