DESICCATOR (Vacuum) 6512
These Desiccators are made of Polypropylene and Polycarbonate. These autoclavable
vacuum desiccators can hold vacuum up-to 740 mm of Hg for 24hrs. without any
greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives
a crystal clear view of the desiccant placed inside. The Knurled knob on the
top provides easy handling of the dome. The lower part is made of Polypropylene.
An internal groove is provided on the flange to hold a silicon rubber O-Ring.
The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This
plug works three way i.e. vacuum creation, shutting off & vacuum releasing.
Each Desiccator is provided with a thick perforated Polypropylene disc with a
big hole in the centre for easy lifting. The tiny holes in the disc provide air
troughs & support to the dishes. However, porcelain discs are advisable in
case of incandescent crucibles.
| |
Size inch |
Flange OD mm |
ID mm |
Plate |
Height |
Max CI* mm |
| (a) |
6 |
171 |
150 |
138 |
204 |
123 |
| (b) |
8 |
232 |
199 |
190 |
257 |
166 |
| (c) |
10 |
276 |
240 |
248 |
315 |
207 |
(*Maximum Clearance above plate in mm)
DESICCATOR (Plain) 6513
Plain Desiccators are physically the same as Vacuum Desiccators. Only difference
is the absence of Stop cock. Grease should be applied on the flange to make
it air tight.
| |
Size inch |
Flange OD mm |
ID mm |
Plate |
Height |
Max CI* mm |
| (a) |
6 |
171 |
150 |
138 |
204 |
123 |
| (b) |
8 |
232 |
199 |
190 |
257 |
166 |
| (c) |
10 |
276 |
240 |
248 |
315 |
207 |
(*Maximum Clearance above plate in mm)
COPLIN JAR 6514
Coplin Jar made of Polypropylene can hold 10 slides of the size 1"x3" back
to back. The interior of the Coplin Jar is grooved in a way to hold slides
in erect position. Domed & shallow thread screw cap provides protection
to the slides.
SLIDE MAILER 6515
Slide Mailers present the best option to carry prepared slides from one place
to another. Moulded in Polypropylene, these Slide Mailers are available in
two sizes i.e. 2 slides & 5 slides.
SLIDE BOX 6516
These Slide Boxes are durable, compact & provide utmost protection to 1"x3" slides.
Heavy walls will not wrap, splinter or crack. Boxes are unaffected by humidity
and are thoroughly insect proof. Base of the slide box has a numbered index
for easy slide Identification. Slides:
a 25
b 50
c 100
SYPHON 6517
These self priming Syphons can be used for pouring liquids from large containers
to small ones without actually lifting them. Insert the open end of the tube
in the liquid, close the stop cock and pump the bulb. As soon as the liquid
enter the bulb, flow is automatically regulated. Stop pumping further. Liquids
can now be dispensed by opening the stopcock. Size : 6mm
VOLUMETRIC FLASK 6518
Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have
good contact clarity.
These autoclavable flasks are provided with screw caps to prevent leakage.
Capacity:
a 25ml
b 50ml
c 100ml
d 250ml
e 500ml
f 1000ml
CONICAL FLASK 6519
Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable.
The screw cap keeps the contents of the flask contamination free and makes
the flask leakproof. Threads should be disengaged before autoclaving. Capacity:
a 100ml
b 250ml
c 500ml
FLASK STAND 6520
Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every
step provides excellent support to the round bottom flask at every point
of Contact. This Flask Stand can hold round bottom Flasks up to 10Ltr. capacity.
This stackable Flask Stand can also be steam autoclaved.
SEPERATORY FUNNEL 6521
Separatory Funnel is made of Polypropylene, giving it excellent contact clarity
and strength. This pear shaped, autoclavable separating funnel has a leakproof
threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating
PTFE plug, is push fitted to the stem of th seperatory funnel. Capacity:
a 100ml
b 250ml
c 500ml
FUNNELS - LONG STEM 6522
These long stem funnels have smooth walls, 60 cone angle and external ribs
to prevent air lock. Moulded in Polypropylene, these clear funnels can also
be steam autoclaved.
BUCHNER FUNNEL 6523
Moulded in Polypropylene, these two piece funnels are light weight, easy to
clean & autoclavable. The top portion can be snap fitted with the lower
one forming a vacuum seal which does not require greasing. The base of the
top portion has a perforated filter plate. Size:
a 70mm
b 110mm
| 
