STRAW HOLDER 10295
Consist of a spindle mounted on centers & having a spring collar for gripping straws & such like to form light levers.

GIMBLE LEVER 10296
Obviates extremely careful adjustments as the writing lever always falls towards the paper.

SIMPLE LEVER 10297
Stout nickeled frame with stop piece at one end; inter changeable 1/4” stem, the lever fit through axle permits the lever to be adjustable for length.

BRODIE UNIVERSAL LEVER 10298
The axle is screwed has two nut between which the interchangeable levers are centered while screwing up the central screw. The stem screws into the head in various positions with adjustable spring support, one plain lever; one notched lever with hole & one Short Lever.

FIXIT LEVER 10299
It has various levers which can be fixed to the spindle in the centre of which is vulcanite roller having 3 pins set at 90 deg. on the centre rod carrying a spring that can be caused to bear against the roller its tuning while other adjustments are made.

ISOTONIC LEVER 10301
With cam in place of after loading screw without hooks & weights.

HEART LEVER STARLING 10302
Nickeled frame Nickle Silver Spring; Notched steel lever.

AFTER LOAD LEVER 10304
With supporting screw & holes for attaching muscle.

STUDENT ISOMETRIC LEVER 10305
Holder carrying a length of spring steel wire & flat steel lever with holes for attaching the thread wire; adjustable.

FRONTAL WRITING POINTS 10306

MYOGRAPH LEVER 10307
With After Load Screw & fixing nuts t fit any myograpgh.

STARLING CRANK MYOGRAPH 10310
Complete with frog board, similar to starling Myograph but fitted with paper.

IMPROVED MYOGRAPH 10311
Raised Sides, fixing corks, paraffin bed with myograph lever.

FROG BOARD 10314
15cm. x10cm. Cork topped with elastic band & fork.

FROG MUSCLE CHAMBER 10316
Perspex both with clamp & drain, pair of adjustable silver electrodes, adjustable heart lever fitment.

NEW NERVE MUSCLE CHAMBER 10318
17cm. x 33cm. Perspex bath, cork lined bottom, pair of adjustable silver electrodes, interchangeable Muscle & Heart Lever fitments, clamp & drain.

FROG HEART CHAMBER 10319
Bath fabricated out of Transparent Perspex sheet, chemically welded to make it perfectly leak-proof. Complete with clamp & drain, a pair of silver electrodes and adjustable Heart lever fitments.

STANDS

BOSS HEADS 10330
All stands have, stable, machined bases & machined upright set for perfect vertically. Standard dia upright 9mm. All Boss Heads (X Blocks) are machined from solid Brass rods.

PLAIN STAND 10334
38mm. high upright

ADJUSTABLE STAND 10335
With quick tangential adjustment & clamp nut. 38cm. high upright.

X-BLOCK (Standard) 10336
Machined from solid brass rod, chrome plated to hold 9mm, & 6mm. dia rods.

X-BLOCK (Standard Large) 10337
Machined from solid brass rod, to hold 12.5mm & 9mm. rods chrome plated.

X-BLOCK (Open Sided) 10338
Machined from solid brass rod, with holds rods 3mm. to 13mm. dia convenient in use.

MUSCLE GRIP 10340
With stem to fit ‘X’ block

HEART CLIP 10341
Frog, stainless steel.

RESPIRATION INSTRUMENTS

IDEAL RESPIRATION PUMP (V.R.V.S.) 10351
Single cylinder pump with mechanically operated value. All metal construction. The driving cone has 3 slots of 6”, 9”, 12” dia and is accurately balanced. A 0.25 HP motor workable on 220V AC 50Hz single phase operates with the pump. The stroke is adjustable and is graduated in ccs upto 250CC. Motor coupled on adjustable castor wheeled base.

PNEUMOGRAPH-STETHOGRAPH 10354
Corrugated rubber tube with side clips, open link chain. Suitable for use with any Tambour.

SPIROMETER 10355
Capacity 6 litre complete with chain/chord compensates counter balance to float through pulley. Tube calibrated to denote volume. Inlet and outlet tubes provided. Complete with corrugated tube and mouth piece.

BENEDICT ROTH RECORDING SPIROMETER (BMR) 10357
Six litre capacity Spirometer has been provided with a unit of 4-speed electric recording Kymograph with gravity writing ink-pen. Easily accessible valves, soda-lime container with screw connections in central chamber drain cocks to all tubes and containers. Sampling cock provided for connecting the patient to Spirometer or atmosphere. The unit is fitted on portable frame. Complete with valves tube, mouth piece, nose clip, ink writing pen marker etc.

CYLINDERS/PAPERS

GLAZED PAPER 10361
100 cms. x 15 cms - 100 Nos.

GLAZED PAPER 10362
50 cms. x 15 cms - 100 Nos.

CYLINDERS 10364
6” diameters x 6” high with locking clamp.

CYLINDERS 10365
6” diameters x 10” high with locking clamp.

DRUM PAPER CLIP 10367
Enabling the paper to remain fixes to drum without chance of slipping.