DISSECTING MICROSCOPE 8097
A versatile instrument for fine dissection work. The high eyep-oint lens (either 10X or 20X) is mounted on a jointing arm allowing the whole stage area to be scanned. The wide glass stage has two spring clips and a reversible sub-stage mirror/opal face illuminator. Focusing is by a rack and pinion mechanism and detachable rests on either side of the stage provide a steadying support for hands during fine dissection. All metal construction. Supplied complete with X10 and X20 lenses in a wooden cabinet.
Dimensions: Overall height 180mm. approx. Stage 65 x 85mm

HAND MICROTOME ROUND (AS PER HARRIS) 8101
Sample to be sectioned is supported in styropith or other material and placed in a central well. Turning a milled knob at the base of the microtome raises the sample, and sections can be cut from the top using a razor. Screw has l9mm overall movement with click stops at 20mm intervals. Top diameter 63mm, well diameter 22mm.

RAZOR (for above) 8102
A high quality carbon steel single edge razor with folding cover.

HAND MICROTOME, BOX TYPE 8104
With table clamp for cutting the paraffin embedded specimens up to 50 microns in increments of 5 microns. Body is of cast aluminum alloy 150x75x60mm with corrosion resistant oven baked finish having a stainless steel top plate, housed in polished wooden case. Supplied with table clamp fine brush and 4 plane slides plus 1 pkt. of razor blades.

ROCKING MICROTOME 8109
Ideal for student use and routine work. It will cut ribbons of sections from specimens of dia up to 20mm, and using wooden blocks section of specimens up to 18 x 25 mm may be cut. Supplied with object holder, knife and honing stone.

ROTARY MICROTOME 8110
It is of immense use for Medical Institutions, Research Laboratories etc. and gives very good results for cutting thin sections. It is mounted on a heavy cast iron base to ensure rigidity and long life. The housing gives maximum protection to the mechanism against dust and paraffin waste etc. It is driven by handle which can be locked in position. The cutting sections obtained by mechanically operated crank can be adjusted in steps of 1u to 25u by means of a knurled knob on the front of the instrument.
The efficient ball and socket clamp renders possible to interchange specimen clamp and paraffin stage with a single motion. The instrument is equipped with a rotating knife, honing plate, three object holders and oil-can.
Specifications: Feed adjustment: 1-25 micron (in step of 1 micron).
Opening of object stage: 30x15mm Overall height: 260mm
Size of case: 500 x 400 x 350mm Weight: 30Kg approx.

ROTARY MICROTOME (Precision) 8116
A heavy base with hinged cover for protecting the interior mechanism, and knife holder. With every complete revolution of the drive wheel, the feed panel engage the teeth of rachet wheel which advances the object holder through cone and inclined plane mechanism, tissue sections can be cut down to even 1 micron. A safety device automatically disengages the feed mechanism at the end. Feed indicator is in front and feed setting is at the back of Microtome which sets 1 to 50 micron. A razor 120mm made from High carbon steel and tested for Micro structure is supplied with instrument. There is an arrangement to tilt angle of the razor adjustable up to 30º on a reference scale. Technical Features:
Feed adjustment: 1-50 Micron (in step of 1 micro)
Total feed excursion: 28mm opening of object clamp.
Hall and flange type: 37 x 25mm,
Overall dimensions: 400 x 250 x 175mm. Weight: 25 Kg. approx.

FREEZING MICROTOME 8118

CRYOSTAT MICROTOME 8120

MICROTOME RAZOR SHARPENER (Automatic) 8122

TISSUE PROCESSOR (Automatic) 8025
For micro-slides tissues staining process atomisation.